This Hand Book will be given to the students of our course ANALYSIS, DESIGN AND DETAILING OF RCC BUILDING BY HAND CALCULATION AS PER BNBC 2020 & ACI 318-08.
Content of this Hand Book:
PART-01 : Super Structure
- Load Calculation
Dead Load
Live Load
Wind Load
Seismic Load - Design of Two Way Beam Supported Slab
- Design of One Way Slab
- Design of Flat Plate Slab
- Analysis of frames
- Design of Singly Reinforced Beam
- Design of Doubly Reinforced Beam
- Design of T Beam
- Design Short Columns
- Design of Slender Columns
- Serviceability Criteria. Such as Deflection, Drifts, Irregularities etc.
- Design of Stair
- Design of Underground Water Tank
- Design of Overhead Water Tank
Details Table of Contents:
Preface – 3
Acknowledgements-4
Basics of Reinforced concrete-5
Lateral Force Resisting System-5
Desirable characteristics of earthquake resistant buildings – 6
Structural Irregularities – 6
Outline of design process-8
Selection of Seismic analysis method -10
Floor Plan – 11
Building Information – 11
Two Way Slab Design – 12
Beam Supported Slab – 12
Stair Design-18
Wind Load Calculation-20
Seismic Load – 32
Load Combination – 43
Post Analysis Checklist – 45
Base Shear Check – 45
P –delta check – 45
Story drift check for seismic loads – 46
Story sway check for wind loads – 47
Torsional irregularity check – 47
Soft story check – stiffness irregularity check – 48
Design of Beams – 49
Singly Reinforced Beam – 51
Doubly Reinforced Beam – 54
T Beam – 55
Shear Design of Beams – 56
Column Design – 57
Short Column (Axially Loaded Columns) – 57
SMRF Check – 59
Irregularity Check – 59
Minimum Column and Beam size – 59
Member check as column – 59
Member check as Beam – 59
Check Reinforcement percentage – 60
Strong Column weak Beam Requirement – 60
Joint shear check – 61 Water tanks – 65
Rectangular Water Tanks – 65
Under ground water tanks – 73
Reference – 82
There is one more part of this book PART-02, that part is included in the Foundation Design course ......
PART-02 : Substructure
Click here for details of Sub Structure part
Author & Instructor: * Structural Design Engineer * Having more than 5years of Experience. * Member, Institute of Engineers of Bangladesh * Representative,IEB, Upazila Parishad Building Design Approval Committee Call for Registration: Instructor: 01830438534 [For Course related information] Course Registration: 01633905761, 01830438534 [For Registration related information] Join with us today Facebook Page: DESIGN INTEGRITY Facebook group: Civilian Study Zone
