# Course Content:

### Class -1: Basics of RCC Design

• Basic Concepts of Analysis and Design of RCC Buildings
• Understanding different Types of Frame System
• Explanation of the project to be analyzed
• Introduction to BNBC 2020
• Material Strength Modulus of Elasticity, Shear Modulus, Creep & Shrinkage Effects, Unit Weight of Concrete, Stress-strain theory of Concrete Materials according to BNBC 2020 and ACI Codes
• Material Strength Modulus of Elasticity, Shear Modulus, Creep & Shrinkage Effects, Unit Weight of Concrete, Stress-strain theory of Steel Materials according to BNBC 2020 and ACI Codes
• Strength Reduction Factors according to BNBC 2020 and ACI Codes
• Load Factors according to BNBC 2020 and ACI Codes

### Class-3: Two Way Slab Design

• Basics of Two Way Slab Design
• Deflection Criteria
• Flexural Design-Moment Coefficient method
• One way shear Check
• Detailing of Two Way Slab

### Class-4: One Way Slab Design

• Basics of One Way Slab Design
• Deflection Criteria
• One way shear Check
• Flexural Design
• Detailing of One Way Slab

### Class-5: Flat Plate Slab Design

• Basics of Flat Plate Slab Design- Direct Design Method
• Deflection Criteria
• One way shear Check
• Punching Shear Check
• Flexural Design
• Detailing of Flat Plate Slab

• Occupancy Category
• Building Enclosure
• Wind Speed
• Gust Factor
• Directionality Factor
• Topographical Factor
• Exposure

• Base Shear Calculation
• Basics of Time Period
• Basics of Response Spectrum Curve
• Zone Factors
• Response Modification Factor
• Seismic Weight

### Class-8: Application and Analysis of Frame for Different Loads

• Application of Loads on Frames
• Property Modifiers
• Analysis of Frames (Software Analysis)

### Class-9: Serviceability Criteria

• Sway Check for Wind Load
• Drift Check For Seismic Load
• Deflection Checks for Gravity Loads
• Torsional Irregularity Check
• Base Shear Check
• Joint Shear Check

### Class-10: Design of Beams

• Design of Singly Reinforced Beam
• Development Length
• Deflection Criteria
• Long Term Deflection
• Torsion Criteria
• Shear Criteria

### Class-11: Design of Beams

• Torsion Criteria
• Shear Criteria

### Class-12: Design of Beams

• Design of Doubly Reinforced Beam
• Design of T-Beam
• Detailing of Beam

### Class-13: Design of Columns

• Basics of Short Column and Slender Column
• Design of Short Column
• Design of Slender Column

### Class-14: Design of Columns

• Basics of Short Column and Slender Column
• Design of Short Column
• Design of Slender Column

### i) Design of Stair

• Design of Stair
• Detailing of Stair

### ii) Design of Water Tank

• Detailing of Overhead Water Tank
• Design Underground Water Tank
• Detailing of Underground Water Tank

Instructor:
* Structural Design Engineer
* Having more than 5years of Experience.
* Member, Institute of Engineers of Bangladesh
* Representative,IEB, Upazila Parishad Building Design Approval Committee

Call for Registration:
Call for more details:
Instructor: 01830438534 [For Course related information]
Course Registration: 01633905761, 01830438534 [For Registration related information]

Join with us today